| Tin tức NVL ngành nhựa - Plastic |
|
|
| Sản phẩm NVL ngành nhựa - Plastic |
|
|
| Liên hệ - Contact |
|
|
|
|
|
| LIÊN KẾT WEBSITE |
|
| LƯỢT TRUY CẬP |
|
|
| Nhựa PC (Nhựa Polycarbonate) |
| Nhựa PC (Nhựa Polycarbonate) |
| Quay lại |
 |
Nhựa PC (Nhựa Polycarbonate)
Polycarbonate is a durable material. Although it has high impact-resistance, it has low scratch-resistance. Therefore, a hard coating is applied to polycarbonate eyewear lenses and polycarbonate exterior automotive components. The characteristics of polycarbonate compare to those of polymethyl methacrylate (PMMA, acrylic), but polycarbonate is stronger and will hold up longer to extreme temperature. Polycarbonate is highly transparent to visible light, with better light transmission than many kinds of glass.
Polycarbonate has a glass transition temperature of about 147 °C (297 °F), so it softens gradually above this point and flows above about 155 °C (311 °F). Tools must be held at high temperatures, generally above 80 °C (176 °F) to make strain-free and stress-free products. Low molecular mass grades are easier to mold than higher grades, but their strength is lower as a result. The toughest grades have the highest molecular mass, but are much more difficult to process.
Unlike most thermoplastics, polycarbonate can undergo large plastic deformations without cracking or breaking. As a result, it can be processed and formed at room temperature using sheet metal techniques, such as bending on a brake. Even for sharp angle bends with a tight radius, heating may not be necessary. This makes it valuable in prototyping applications where transparent or electrically non-conductive parts are needed, which cannot be made from sheet metal. PMMA/Acrylic, which is similar in appearance to polycarbonate, is brittle and cannot be bent at room temperature.
Main transformation techniques for polycarbonate resins:
- extrusion into tubes, rods and other profiles including multiwall
- extrusion with cylinders (calenders) into sheets (0.5–20 mm (0.020–0.787 in)) and films (below 1 mm (0.039 in)), which can be used directly or manufactured into other shapes using thermoforming or secondary fabrication techniques, such as bending, drilling, routing, laser cutting etc.
- injection molding into ready articles
Cám ơn bạn đã quan tâm đến sản phẩm và dịch vụ của công ty Sơn Anh chúng tôi!
|
 |
|
 |
|
 |
|
 |
|
|
| HỖ TRỢ |
| RTV keo mỡ silicone, amino silicone, mỹ phẩm, nông nghiệp, dệt nhuộm |
Ms. Nguyễn Trang
024.3995.9799 - trangkd.sonanh@gmail.com |
| | Dầu Silicone, Silicone lỏng, Phá bọt silicone, hàng tiêu dùng, thực phẩm & dinh dưỡng |
|
| | Supply Chain & Logistics |
Mr Nam
024.3995.9799 - namnguyen.vhttdl@gmail.com |
Ms. Giang
024.3995.9799 - huonggiangftu.99 |
Ms Trang
091.150.2290 - trangkd.sonanh@gmail.com |
| | General Administration - Accounting, Quản trị chung - Kế toán |
Mr Dũng
024.3995.9799 - sonanhgt |
Ms Trang
091.1502.290 - trangkd.sonanh@gmail.com |
Ms Hương Giang
0243.995.9799 - huonggiangftu.99 |
| | |
|
|
| |
|
Công Ty TNHH Thương Mại Tổng Hợp Sơn Anh
SonAnh General Trading Company Limited
Office Address : No. 06, 127/56 Van Cao Street, Lieu Giai Ward,
Ba Dinh District, Hanoi City, Vietnam
Warehouse : Duc Tu Hamlet, Dai Dong Ward, Dong Anh Dist., Hanoi
Tel : +84-24-3995 9799
Fax : +84-24-3761 5666
Email : sonanh@sonanh.com
Website : www.sonanh.com
|
